DWĀR is Konita's door collection: flush, decorative, and entrance doors built on an engineered core, finished to architectural specification. Three collections, available in custom sizes, finishes, and hardware configurations.
Door Collections
Finish Options
Standard Thickness
Sizes & Hardware
Doors are usually the last specification on a project.
The budget line that gets squeezed when something else runs over.
DWĀR exists because that's the wrong order.
A door is the most-used architectural element in a building — opened, closed, leaned on, slammed, weathered by every season. It defines the threshold between rooms and the threshold to a building. It's the first thing a hand touches.
DWĀR is built to be specified first.
DWĀR doors are engineered for the conditions Indian buildings actually face: monsoon humidity, summer temperatures past 45°C, dust, salt air on the coast, and the daily handling that wears doors down faster than weather does.
| WATER EXPOSURE | FIRE EXPOSURE | HIGH HUMIDITY | |
|---|---|---|---|
| DWĀR DOOR | Sealed moisture barrier. No swelling. | Tested to IS 3614 fire-resistance standards. | Engineered core. Holds dimension year-round. |
| ORDINARY DOOR | Swells. Warps. Layers separate. | Fails under heat. | Warps and bows in monsoon. |
Sealed core, moisture-resistant edges. Tested for bathroom and wet-area installation.
Tested to IS 3614 standards. Available in 30, 60, and 90-minute ratings.
Engineered core withstands daily slam-force without dimensional change.
No re-painting, re-sealing, or re-finishing for 30+ years.
Every DWĀR door is built in five distinct layers, each engineered for a specific performance role, together forming a door that performs and looks exceptional.
The outermost layer, available in veneer, laminate, painted, or textured options. Defines the door's visual character.
A precision-bonded decorative substrate, providing consistent colour, grain, or texture across the entire door face.
The structural core. Provides dimensional stability, rigidity, and screw-holding for hardware mounting.
A counterbalancing layer applied to the reverse face, preventing bow and warp under changing temperature and humidity.
A sealed moisture barrier at the base, protecting the door against humidity infiltration from floor contact and wet areas.
Key specifications for DWĀR doors, for project specification and procurement planning.
| Specification | Available Options |
|---|---|
| Door type | Flush / Decorative / Premium entrance / Interior |
| Thickness | 25mm / 30mm / 35mm / Custom |
| Standard size | 7ft × 3ft / 7ft × 3.5ft / Custom height and width on request |
| Surface finish | Veneer / Laminate / Painted / Textured |
| Core type | Engineered hollow core / Solid core / Premium composite |
| Colour options | As per collection, custom colour matching available |
| Hardware | Compatible with standard and premium door hardware, frame system available |
| Frame System | Konita WPC Frames, available in matching finish and size |
| Primary use cases | Homes, apartments, offices, hospitality, institutional |
| Customization | Size, finish, hardware, frame compatibility: discuss with team |
| Documentation | Technical datasheet, installation guide, available on request |
DWĀR doors are offered in three collections, each calibrated for a specific market segment and application context.
Elegant flush and panel doors for quality residential and commercial interiors. Clean lines, durable finish, broad hardware compatibility.
Premium veneer and textured surface doors for high-specification residential, luxury apartments, and boutique hospitality.
Bulk supply, consistent specification, and custom sizing for apartment developers, commercial fit-outs, and institutional projects.
A single specification standard across applications. Same engineered core, same finish quality, calibrated for the specific demands of each opening type.
Heavier core. Reinforced edges. Compatible with mortise locks and multi-point hardware.
Lighter core for room-to-room use. Veneer, laminate, or painted finish.
Sound-dampening core. Standard size and custom width.
Sealed moisture barrier. Tested for wet-area installation.
Impact-resistant for service corridors, kitchens, and back-of-house.
Project-specification compatible. Bulk supply, consistent dimension across units.
Every DWĀR door is produced on calibrated machinery, ensuring consistent dimensions, square edges, and tight tolerances across every unit in a batch.
Surface finishing is the defining characteristic of a premium door. DWĀR doors are inspected for surface uniformity, colour consistency, and edge quality before leaving the facility.
Every DWĀR door is engineered for compatibility with standard and premium door hardware, tested for screw-holding strength and hinge performance.
Finished doors are individually wrapped and frame-protected for transport, arriving at site in the condition they left the factory.
Three resources for architects, designers, and procurement teams specifying DWĀR doors.
Physical finish samples dispatched on request. Veneer, laminate, painted, and textured options for design approval.
Specification-ready datasheets covering door construction, performance, hardware compatibility, and installation guidance.
Our DWĀR team works with architects and designers to select the right collection, finish, and specification for each project.
DWĀR doors are designed to install with Konita WPC Frames. Matched finishes, factory-tested fit, and a single supplier for the door system end-to-end.
View WPC Frames →